What are the common failures and solutions of the cutting head of the laser pipe cutting machine

Laser tube cutter has occupied a dominant position in the field of industrial production and processing by virtue of the advantages of efficient cutting efficiency and guaranteed cutting accuracy. For the laser pipe cutting machine, the laser cutting head is its cutting tool. In the use of laser pipe cutting machine for pipe cutting, often due to laser pipe cutting machine failure or operating errors and laser cutting head failure phenomenon, resulting in laser pipe cutting machine can not be used normally, affecting the efficiency of the cutting as well as resulting in the consumption of production costs. Below we will talk about the laser pipe cutting machine cutting head what are the common failures and solutions:

Laser pipe cutting machine on-site operation

Failure 1: Can not find the signal position of the laser cutting head of the laser tube cutting machine on the CNC panel, the signal position of other components can be displayed normally.

Solution: The cause of this phenomenon is often due to a faulty or broken signal line of the laser cutting head. The second is that the CNC panel loses the control information of the laser cutting head position. In this case, it is necessary to repair or replace the signal line of the laser cutting head. And update the operating system in time.

Failure 2: The cutting position information of the laser pipe cutter is lost, but the laser cutting head can operate normally.

Solution: the cause of this phenomenon, often due to the laser pipe cutting machine rotating disk can not receive the signal, or communication CNC panel for laser pipe cutting machine communication line failure or damage, then we must timely test the circuit replacement or repair.

Failure 3: The laser cutting head of the laser pipe cutting machine wobbles during cutting.

Solution: This is due to the fact that the fixing bolts are not firmly tightened when the laser cutting head is fixed by the laser cutting machine. Or the locking time of the laser cutting head has not reached the required time. At this time, you can tighten the fastening bolts on the laser pipe cutting machine, and reset the locking time.